Bowl Seal / 316140
2 Part Bowl Seal With Drain Holes 316140
The Bowl Seal is crucial for your head and system. The Bowl Seal seals the bowl form the rest of the system, keeping water in the bowl, and keeping the vacuum ready to go. This item includes two seperate seals, known as the ball seal, and the bowl seal. Both are necessary for proper function. If your head only has one seal, it will not function properly.
Includes installation instructions.
Fits: SeaLand toilet model numbers: 906, 908, 910, 911-28, 911m28, 913m28, 510, 510+, 511, 2010, 2011, 206, 208, 248, 306, 348, 406E, 506, 508, 547, 548, 806, 808, 847, 848, 1006, 1008, 1047, 1048 and 106.
Product Note; All VacuFlush toilets should use the NEW 311462 Bowl Seal, this seal does not have the drain holes. The older Traveler ( 2000 & older ) toilets needed this drain hole.
Bowl seals should be replaced every few years. Your bowl seal may need to be replaced sooner if...
- Water is leaking from your bowl.
- A vacuum leak is occuring from the head.
- Your flush ball is also needing replacement.
Tech tip: When replacing your bowl seal, you should also replace your ball and shaft kit. Both parts work together and can be serviced at the same time.
Great Product for vacuflush
Posted by Jerritt on 29th Apr 2016
Item was as described, 2 seals, 1 teflon, 1 a thicker rubber, to create that seal needed for vacuflush toilet system. took 30mins to replace. Works great now
This is the right seal for the 910 traveler toilet
Posted by Unknown on 1st Nov 2015
We have these toilets in two of our rental units. Once the seals started leaking the toilets became stinky. I ordered the wrong seal kit (didn't have the little drain hole; make sure you get the 1 with that drain hole). Easy to install; just remove that metal band in the center R and R the seals and clamp things back together. I ordered the second seal and fixed both toilets. Much easier to rent now.
seal is easy install
Posted by Unknown on 27th Jul 2014
Good direction right on the package. Recommend using fine (600) grit Emory paper to smooth up ball before reassembly with new seal. Used a light coating of Vaseline too. Works great and no leaks.
Seacoast Services Response
We do not reccommend sanding the flush ball
Posted by Unknown on 12th Apr 2014
I was surprised to see that all the parts I had ordered for our Traveler RV toilet fit perfect.
I was very satisfied with the service and quality.
Very fast delivery and good price.
Posted by Bob Bream on 11th Apr 2014
I received my parts much quicker than I expected. Sealand also had the best price I could find on the internet. The directions were complete, the parts excellent and the job was completed in a very short manner.
Posted by Unknown on 17th Oct 2013
Package was receveived quickly and well protected. The materials were high quality, and installation was fast and easy. The best part - it worked.
Fast order processing and shipping
Posted by Unknown on 12th Aug 2013
This product fails way too often - not the fault of this company - so it is important to have spares; Seacoast gets it out to you fast at the best price I have found.
Seacoast Services help
Posted by Unknown on 20th Mar 2013
Help from Seacoast could not have been better
Posted by John on 23rd Jan 2013
The item fit directly in place of the old one and worked great. Shipment and delivery were on time.
Posted by John on 21st Aug 2012
Installed and worked flawlessly. Just like the sales rep said it would.
Find Similar Products by Category
Customers also viewed