2 Part Bowl Seal With Drain Holes 316140
The Bowl Seal is crucial for your head and system. The Bowl Seal seals the bowl form the rest of the system, keeping water in the bowl, and keeping the vacuum ready to go. This item includes two seperate seals, known as the ball seal, and the bowl seal. Both are necessary for proper function. If your head only has one seal, it will not function properly.
Includes installation instructions.
Fits: SeaLand toilet model numbers: 906, 908, 910, 911-28, 911m28, 913m28, 510, 510+, 511, 2010, 2011, 206, 208, 248, 306, 348, 406E, 506, 508, 547, 548, 806, 808, 847, 848, 1006, 1008, 1047, 1048 and 106.
Product Note; All VacuFlush toilets should use the NEW 311462 Bowl Seal, this seal does not have the drain holes. The older Traveler ( 2000 & older ) toilets needed this drain hole.
Bowl seals should be replaced every few years. Your bowl seal may need to be replaced sooner if...
- Water is leaking from your bowl.
- A vacuum leak is occuring from the head.
- Your flush ball is also needing replacement.
Tech tip: When replacing your bowl seal, you should also replace your ball and shaft kit. Both parts work together and can be serviced at the same time.